{"id":103,"date":"2026-10-11T04:03:32","date_gmt":"2026-10-11T04:03:32","guid":{"rendered":"https:\/\/www.polypew.com\/?post_type=product&p=103"},"modified":"2026-10-11T04:07:33","modified_gmt":"2026-10-11T04:07:33","slug":"kabuto-turd-full-metal-kit","status":"publish","type":"product","link":"https:\/\/www.polypew.com\/?product=kabuto-turd-full-metal-kit","title":{"rendered":"Kabuto\/TURD Full metal kit"},"content":{"rendered":"
Kabuto \/ TURD Kit<\/h6>\n

Housing<\/strong><\/p>\n

manufacturing method: CNC
\nmaterial:\u00a0 6061 Aluminum
\n<\/span>treatment: anodized red<\/p>\n

Lever, Activator and 5.5 mm threaded pin<\/strong><\/p>\n

manufacturing method: CNC and EDM
\nmaterial : S136
\ntreatment: hardened \/ blackened<\/p>\n

Get your optional safety selector here:<\/strong> Kabuto\/TURD safety lever – Polymer Pew<\/a><\/p>\n

Fitment:<\/strong><\/p>\n

These are made to fit a variety of lowers and uppers but due to the variance in tolerance from manufacturer to manufacturer , you will need to do minor shaving for fitment.<\/p>\n

    \n
  1. \n
      \n
    1. Activator bottom leg:\u00a0 May require shaving the bottom tip of the activator if bolt is binding.. the bottom of the activator tip touches the trigger and push down to reset it.\u00a0 If it’s too long it cannot go all the way down and will push up on the entire assembly causing it to bind.\u00a0 How to test?\u00a0 push lever all the way back into reset position , then see how the entire housing sits.\u00a0 If it gets raised up, it’s too long.<\/li>\n<\/ol>\n<\/li>\n<\/ol>\n

       <\/p>\n