Poly Pew Shop

Kabuto/TURD Full metal kit
Kabuto/TURD Full metal kit - Image 2
Kabuto/TURD Full metal kit - Image 3
Kabuto/TURD Full metal kit - Image 4
Kabuto/TURD Full metal kit - Image 5
Kabuto/TURD Full metal kit - Image 6
Kabuto/TURD Full metal kit - Image 7
Kabuto/TURD Full metal kit - Image 8
Kabuto/TURD Full metal kit - Image 9

Kabuto/TURD Full metal kit

$99.00

NEW All metal Kabuto / TURD TAD ( trigger assist device) Currently includes a free printed ABS safety selector. What’s New?? 1) Pre-trim housing to fit more lowers / uppers.  Top of housing is beveled to allow upper to close down easier 2) Threaded pin to allow easier installation  and prevent pin from falling out 3) Front lever blocker – prevent lever from falling forward and getting stuck under hammer Note:  Kabuto works off the top of your lower so the distance to the safety and trigger is different for each lower.  This is the reason that a single activator…

Category: , ,

Description

Kabuto / TURD Kit

Housing

manufacturing method: CNC
material:  6061 Aluminum
treatment: anodized red

Lever, Activator and 5.5 mm threaded pin

manufacturing method: CNC and EDM
material : S136
treatment: hardened / blackened

Get your optional safety selector here: Kabuto/TURD safety lever – Polymer Pew

Fitment:

These are made to fit a variety of lowers and uppers but due to the variance in tolerance from manufacturer to manufacturer , you will need to do minor shaving for fitment.

    1. Activator bottom leg:  May require shaving the bottom tip of the activator if bolt is binding.. the bottom of the activator tip touches the trigger and push down to reset it.  If it’s too long it cannot go all the way down and will push up on the entire assembly causing it to bind.  How to test?  push lever all the way back into reset position , then see how the entire housing sits.  If it gets raised up, it’s too long.

 

 

Related products